SY60FM-SKF Bearing Unit

SY 60 FM
Pillow block ball bearing unit with narrow inner ring and eccentric locking collar, cast iron, ISO standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is intended for use in applications where the direction of rotation is constant. It has a narrow inner ring and is locked onto the shaft by an eccentric locking collar, making it easy to mount.
Strong
Ready to mount
Lubricated and sealed bearing
Designed for rotation in one direction
Accommodate static initial misalignment

Dimensions
d : 60 mm Bore diameter
d1 : ≈75.64 mm Shoulder diameter of inner ring
d2 : 82 mm Outside diameter of locking ring
A : 60 mm Base width
A1 : 42 mm Top width
A5 : 39 mm Standout of end cover
B : 36.7 mm Width of inner ring
B1 : 52.6 mm Overall bearing width
B4 : 7.95 mm Distance from locking device side face to thread centre
H : 69.9 mm Height of spherical seat centre
H1 : 26.5 mm Foot height
H2 : 137.5 mm Overall height
J : 190.5 mm Distance between attachment bolts
J : max.202 mm Distance between attachment bolts
J : min.179 mm Distance between attachment bolts
L : 240 mm Overall length
N : 18 mm Diameter of attachment bolt hole
N1 : 29.5 mm Length of attachment bolt hole
s1 : 39.6 mm Distance from locking device side face to raceway centre