SY60TF/VA201-SKF Bearing Unit

SY 60 TF/VA201
Pillow block ball bearing unit with extended inner ring and set screw locking, high temperature, cast iron, ISO standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for high temperature applications, and for both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Strong
For high temperature applications
Designed for a constant and alternating rotation
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft

Dimensions
d : 60 mm Shaft diameter
d1 : ≈75.64 mm Shoulder diameter inner ring
A : 60 mm Base width
A1 : 42 mm Top width
B : 65.1 mm Width inner ring
B4 : 10 mm Distance from locking device side face to thread centre
H : 69.9 mm Spherical seat centre height
H1 : 26.5 mm Step height
H2 : 137.5 mm Overall height
J : 190.5 mm Distance between attachment bolts
J : min.179 mm Minimum distance between attachment bolts
J : max.202 mm Maximum distance between attachment bolts
L : 240 mm Overall width
N : 18 mm Width of attachment bolt hole
N1 : 29.5 mm Length of attachment bolt hole
s1 : 39.7 mm Distance from locking device side face to raceway centre