SY60TR-SKF Bearing Unit

SY 60 TR
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, ISO standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Strong
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft
Cost-effective

Dimensions
d : 60 mm Bore diameter
d1 : ≈75.64 mm Shoulder diameter of inner ring
A : 60 mm Base width
A1 : 42 mm Top width
A5 : 39 mm Standout of end cover
B :  65.1 mm Width of inner ring
B4 : 10 mm Distance from locking device side face to thread centre
H : 69.9 mm Height of spherical seat centre
H1 : 26.5 mm Foot height
H2 : 137.5 mm Overall height
J : 190.5 mm Distance between attachment bolts
J : max.202 mm Distance between attachment bolts
J : min.179 mm Distance between attachment bolts
L : 240 mm Overall length
N : 18 mm Diameter of attachment bolt hole
N1 : 29.5 mm Length of attachment bolt hole
s1 : 39.7 mm Distance from locking device side face to raceway centre