PE25-XL INA Insert Ball Bearing

PE25-XL INA Radial insert ball bearings
Cylindrical outer ring, with steel aligning ring, location by eccentric locking collar, P seals on both sides

Bearing Part Number = RAE25-XL-NPP-B

Radial insert ball bearings with steel aligning ring
These bearings are based on radial insert ball bearings with an eccentric locking collar or on self-aligning deep groove ball bearings, but additionally have an axially split outer ring as an aligning ring. They are mounted in cylindrical bores and can compensate for static misalignment of the shaft up to ±5°.
Due to the annular slots in the outer ring to DIN 616, they are highly suitable for sheet metal constructions. In this case, they are axially located using snap rings to DIN 5 417.
In series PE, the inner ring is located on the shaft using a locking collar.
The aligning ring has a Corrotect® coating and is thus protected against fretting corrosion. In series PE, the inner ring and locking collar are also coated.