7206-B-XL-TVP-P5-UO FAG Angular Contact Bearing
Description
7206-B-XL-TVP-P5-UO Single Row Angular Contact Ball Bearings
P5 Precision Class Bearing
FAG Manufacture
This range of bearing is usually used in pairs (2 directions) and is highly suitable for the accommodation of radial and axial loads in one direction. Angular Contact Ball Bearings are available in the following contact angles; 15°, 20°, 25°, 30°, 40° and 60°.
A larger contact angle allows the accommodation of higher loads at the sacrifice of speed. A smaller contact angle on the other hand allows for higher speed applications but a lower load rating.
Single row angular contact ball bearings of universal design have the suffix UA, UL or UO and are intended for fitting in pairs in an X, O or tandem arrangement or fitting in groups. These bearings can be fitted in any arrangement required. For tandem arrangements, pay attention to the guidelines in the section link. The suffix UO indicates freedom from clearance in an X or O arrangement.
Dimensions
Dimension Bore: 30
Dimension OD: 62
Dimension Width: 16
Weight: 197g