SIR80ES-SKF Rod End Bearing

SIR 80 ES
Rod end, requires maintenance, female thread with clamping screws
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via grease fitting in the housing and via the shaft. The female thread is available with a left- (prefix SIL) or right-hand thread.
Easy to relubricate
Suitable for heavy static, alternating or impact loads
Simple and ready-to-mount
Slotted shank with clamping screws
Suitable for hydraulic cylinders
Bearing can be exchanged

Dimensions
Bore diameter, bearing inner ring : 80 mm
Outside diameter, housing eye : 178.5 mm
Width, bearing inner ring : 55 mm
Thread designation : M 80x2
Width, housing eye : 60.5 mm
Centre height, housing (from end of shank) : 170 mm
Housing length, total : 267.5 mm
Basic dynamic load rating : 400 kN
Basic static load rating : 560 kN

Properties
Sliding contact surface combination : Steel/steel, standard
Material, housing : Steel
Material, inner ring : Bearing steel
Material, outer ring : Bearing steel
Maintenance Relubrication required
Sealing : Without